S2466x2

The S2466x2 is our largest free-standing Sorber baffle. This 66-inch high model features a cloth hinge that allows the two 24-inch wide baffles to free-stand in a ‘V’ configuration or fold in half when not in use. A built-in strap handle allows for easy transport.

Multiple S2466x2's are included with many of our large format isolation packages, but can also be used as gobos around vocalists, horn players, drummers, or any sound source that needs isolation and volume reduction. Adjacent S2466x2 baffles can be attached together using built-in Velcro flaps. SX2412x2 Height Extenders are available to increase the baffle height to 78 inches.

1.6-inch thick Sorber sound absorption baffles outperform the industry standard 1-inch thick baffles by at least 50%, and are especially efficient at absorbing lower frequencies. SORBER baffles feature a compressed fiberglass core that is encased in a tough Velcro-receptive charcoal gray cloth. 

All Sorber products are extremely efficient at soaking up sound and enjoy Noise Reduction Coefficient (NRC) ratings greater than 90%.  Click here to view acoustic test results. 

Also, all Sorber products have earned a super safe Class A fire rating.  Click here to view fire test results. 

Part numbers are easy to decipher. The ‘S’ stands for SORBER, followed by the width and height of the panels in inches.  Finally, the number after the ‘x’ indicates the number panels in the system.

S2466x2 Instructions

Sorber Features  

• 1.5” thick rigid fiberglass core - provides superior sound absorption compared to acoustic foam and other fiberglass baffles. Allows panels to free stand or lay on top of an acrylic shield (LidPacs).  

• Velcro-receptive acoustic fabric jacket – provides another layer of sound absorption and allows Sorber baffles to attach to acrylic material or other Sorber baffles with Velcro.  

• Sewn seams – fabric jacket fully covers inner fiberglass. No glue is used and there is no exposed fiberglass.