||45"W x 20"D x 36"H
||(1) A3-3, (3)S3D
||An A3-3, 3-section clear shield is used in
front of the amp. Each section of the A3-3 is 2'W x 3'H. An S3D SORBER
baffle is attached to each clear section with supplied Velcro strips.
This AmpPac shields the front and works well with closed-back cabinets.
Acrylic panels and SORBER absorption baffles can be used to help tame the
volume of guitar cabinets. AmpPacs 30 and 31 are designed for use with 4x12
and 4x10 combos and cabinets. AmpPac 30 has 3-sections of clear acrylic with
S3 SORBER baffles attached. AmpPac 31 uses an A3-6 ClearSonic Panel to surround
the cabinet. S3 SORBER baffles treat the inside of the acrylic, and an STC4
lid section completes the enclosure. Like all ClearSonic products, these AmpPacs
can be modified to fit your specific needs.
© 2014, ClearSonic Mfg., Inc.
||45"W x 30"D x 36"H
(1) A3-6, (6) S3D, (1) STC4D
AmpPac 31 uses an A3-6 with attached S3D SORBER baffles to surround
the cabinet. An STC4D SORBER baffle is used as a lid. We recommend
leaving some open space in the rear of this booth for air exchange
if it is being used with a tube amp. A clip on fan is also available.
Approximate sound reduction of 50%.